3M

3M 7447 SCOTCH BRITE

• 

• 

• 

Application Category	Adhesives, Coatings, Sealant Corrosion Removal, Blending/Deburring, Finishing/Polishing
Applications	Blending, Cleaning, Contour Finishing, Deburring, Finishing, Surface Preparation
Brand	Scotch-Brite™
Color	Red, Maroon
Equipment – Machines	Hand Sanding
Form Type	Hand Pad
Grade	Very Fine
Industries	Aerospace, AOEM, Composite, General Industrial, Marine, Metalworking, MRO, Paint Preparation, Transportation & Heavy Equipment, Woodworking
Length	9 in
Length (Metric)	22.86 Centimeter, 228.6 mm
Mineral Type	Aluminum Oxide
National Stock Number	7920015428550
Position	Better
Primary Application	Metalworking, Paint Prep, Coating & Corrosion Removal
Product Form	Hand Pad
Sanding Method	Hand
Sub Industries	Cabinetry, Custom Woodworking and Millwork, Furniture, Metal Fabrication, Primary Wood and Panel Processing
Substrates	All Metals, Carbon Steel, Metal, Paint, Plastic
Width	6 in
Width (Metric)	15.24 Centimeter, 152.4 mm

Details

• Superior alternative to steel wool, wire brushes, sandpaper, and other nonwoven products for cleaning or finishing tasks
• Very fine grade aluminum oxide abrasive cleans, finishes, grains, denibs, and defuzzes
• Suitable for use on wood, metal, plastics, ceramics, porcelain, glass, rubber, or composites
• Reusable pad resists tearing, splintering, shredding, loading and will never rust, providing a long, useful life
• Can be folded, stacked, or rolled for effective cleaning or conditioning on flat, irregular, or contoured surfaces

Scotch-Brite™ General Purpose Hand Pad 7447 combines flexibility with effective cutting action and precise hand control to accomplish tough cleaning jobs or produce fine finishing results, use after use. Very fine grade aluminum oxide abrasives cut fast and fine, leaving a smooth, finished surface. Suitable for use on a wide variety of materials and for many different tasks.

May be used with hand block to access hard-to-reach areas

Suitable for a wide variety of subsratesOffers Precise Hand Control
The performance of Scotch-Brite™ General Purpose Hand Pad 7447 is comparable to steel wool grade 1. However, unlike steel wool, our Scotch-Brite™ pads won’t shred during use, rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or solvents, and rinsed clean for reuse. This multipurpose 6 x 9″ pad can be used by hand for precise control, with a hand pad block for uniform finishing, or on an in-line sander to cover large areas. 

Hand held abrasive bends and curves to round out your finishMay Be Used on a Variety of Substrates
This maroon hand pad uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. 

Many Benefits of Open-Web Abrasives
Our Scotch-Brite&trade industrial abrasive products are a unique surface conditioning product with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

• 

• 

• 

3M DEBURRING WHEEL

Specifications

Application Category	Blending/Deburring, Finishing/Polishing
Applications	Deburring, Finishing, Polishing
Attachment Type	Center Hole
Brand	Scotch-Brite™
Center Hole Diameter	1 in, 10 in, 3 in, 5 in, 8 in
Center Hole Diameter (Metric)	127 mm, 203.2 mm, 25.4 mm, 254 mm, 76.2 mm
Color	Gray, Gray
Density	6, 7, 8
Diameter	10 in, 12 in, 12 mm, 14 in, 16 in, 6 in, 8 in
Diameter (Metric)	15.2 Centimeter, 152.4 mm, 1524 mm, 20.3 Centimeter, 203.2 mm, 2032 mm, 25.4 Centimeter, 254 mm, 30.5 Centimeter, 304 mm, 304.8 mm, 35.6 Centimeter, 355.6 mm, 406.4 mm
Equipment – Machines	Centerless Grinders, Die Grinders, Inline Sanders, Manual Backstand, Pressure Assit Backstand
Form Type	Convolute/Deburring
For Use On	All Metals
Grade	Fine
Industries	Marine, Metalworking
Max RPM	2250, 2550, 2550 RPM, 3000, 3000 RPM, 3600, 3600 RPM, 4500, 4500 RPM, 6000, 6000 RPM
Mineral Type	Silicon Carbide
National Stock Number	5345014459832
Position	Good
Primary Application	Metalworking
Product Form	Wheel
Sub Industries	Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
Substrates	All Metals
Width	0.37 in, 0.5 in, 0.62 in, 0.75 in, 1 in, 1.5 in, 10 in, 2 in, 24 in, 3 in, 4 in, 5 in, 6 in
Width (Metric)	1.3 Centimeter, 10.2 Centimeter, 101.6 mm, 12.7 mm, 127 mm, 15.748 mm, 152.4 mm, 19.05 mm, 2.5 Centimeter, 25.4 mm, 254 mm, 38.1 mm, 5.1 Centimeter, 50.8 mm, 609.6 mm, 7.6 Centimeter, 76.2 mm, 9.398 mm

Product Details

• Provides a clean and economical system for removing fine burrs, yet resulting in a polished finish
• Conformability offers consistent finishing while keeping fresh abrasive mineral continuously exposed
• Non-woven web runs cool and lessens impact on heat-sensitive materials
• Unique resin system produces less smearing, reducing clean and prep time
• Multi-purpose wheel cleans, finishes, blends, deburrs, and polishes all types of metals, composites and glass

Scotch-Brite™ Light Deburring Wheel is a smooth running, convolute-constructed wheel that provides a clean system for light deburring, polishing, and finishing. We made this wheel with Soft construction and smooth operation to require less effort by the operator than a harder wheel.

Our Scotch-Brite™ Light Deburring Wheel is uniquely suited to applications where a moderate degree of conformability and density are needed to maintain critical tolerances while providing a fine polished finish. A unique resin system helps minimize smearing and reduces heat build-up. The Light Deburring Wheel runs cool and resists loading due to its non-woven web construction. We did this to reduce the risk of part discoloration and warping while extending the life of the wheel. The Light Deburring Wheel is available in fine grade abrasive. 

Our Scotch-Brite™ Light Deburring Wheel uses fine grade silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. 

Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We made this wheel with an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.